logo ad

mulch pavers retwal edging boulders cobblers natstone fill
trans

 

 
Ready Mix Stamping Colored
Sidewalk using colored concrete In addition to traditional ready-mix concrete, we offer colored concrete featuring Solomon Integral Colors. Use color for a more decorative look for driveways, sidewalks, patios and walls. There are many colors and shades to choose from. The integral color is mixed into the concrete at the plant during the normal loading process. On multiple loads or prior to the start of the job the addition of water can be introduced only once. This is critical to produce consistent color. Concrete integral color produces a mottled look. Once a clear gloss non-slip sealer is added the color becomes more uniform. For a complete list of the colors available, please refer to the Concrete Color Chart.


Driveway using colored concrete and imprint roller Solomon concrete stain is a product that can be used on either new or existing concrete. The surface requires that all sealers, waxes and dirt be removed. You must not clean the surface with acid or have cleaned it prior with acid. Once the first coat of stain has been applied over concrete, allow it to completely dry before applying the second coat. Neutralize the surface with a cleaning solution of one cup baking soda to 5 gallons of water. For a complete list of the colors available, please refer to the Concrete Stain Color chart . Driveway using colored concrete, imprint roller and concrete stain


Dry Shake Colors by Solomon Colors is a dry mixture surface colorant. The product is applied after the slab has been floated. Unlike the Integrated Color, which is mixed directly into the ready mix before delivery, Dry Shake Color only colors the surface of the slab. Dry Shake can also be used in combination with stamping or roller imprinting. For more information regarding this product, please stop by our sales office and pick up a full color brochure. For a list of available colors, please refer to the Dry Shake Color Chart.

Solomon Colors Release is a product which is used when stamping fresh concrete surfaces. It acts as a lubricant between the surface of the concrete and the stamping tool. Once applied to the surface of the concrete, it will create an antique effect. For a list of available colors, please refer to the Colored Release Color Chart.


If you would like more information on any of Solomon Colors products, please visit their web site:

Solomon Colors


 


horzbar

 

Home | Concrete | Brick | Landscaping | Glass | About Us | Door

If you have any questions or comments about our products, please send an email to our sales staff.
If you have any questions or comments about our website, please send an email to our webmaster.

© 2006, Henry Nelch and Son Company